Difference between revisions of "Mr. EQ"
m |
m |
||
| Line 1: | Line 1: | ||
The '''Mr. EQ''' by [[RunOffGroove]] is a simple equalizer based on the [[Dan Armstrong]] [[Purple Peaker]] and [[Yellow Humper]]. It uses a single [[4049]]/[[4069]] hex inverter to provide two switchable +7dB frequency peaks (at 100Hz and 2.1kHz) and one switchable +/-7dB peak/notch (at 700Hz). | The '''Mr. EQ''' by [[RunOffGroove]] is a simple equalizer based on the [[Dan Armstrong]] [[Purple Peaker]] and [[Yellow Humper]]. It uses a single [[4049]]/[[4069]] hex inverter to provide two switchable +7dB frequency peaks (at 100Hz and 2.1kHz) and one switchable +/-7dB peak/notch (at 700Hz). | ||
| + | |||
| + | http://diy-fever.com/wordpress/wp-content/uploads/2010/07/mr_eq_front.jpg | ||
== Project files == | == Project files == | ||
Revision as of 01:52, 18 September 2011
The Mr. EQ by RunOffGroove is a simple equalizer based on the Dan Armstrong Purple Peaker and Yellow Humper. It uses a single 4049/4069 hex inverter to provide two switchable +7dB frequency peaks (at 100Hz and 2.1kHz) and one switchable +/-7dB peak/notch (at 700Hz).
